Pentax ZX-5N - Manual (Page 25)

3. As shown in the illustration, pull the film leader out
only far enough to reach the take - up spool.
THE SHUTTER CURTAINS ARE FINE-PRECISION
MATERIAL. DO NOT TOUCH THEM WITH YOUR
FINGERS OR ANY OTHER OBJECT WHILE LOADING
FILM.
4. Align the film leader with the film leader end mark
O as shown.
• Make sure that the film perforations properly engage
on the sprocket teeth
• Make sure that the film leader is positioned under the
film retainer 0 as shown in the illustration.
OD
>
o
o
■o
m
3
)
>
H
o
z
3
m
■D
>
39
>
o
z
If you have pulled out too much film, push it back Into
the cartridge to reduce the slack.
The DX information pins in the film chamber are used
to read film speed. Keep them clean and free from
scratches.
To remove smudges, wipe them gently
with a soft, dry cloth.