7) switching the metering mode, Using the spot metering mode, How to use – Pentax ZX-5N User Manual

Page 72: Set the metering mode switch to the [ce] position, Switching the metering mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

(7) SWITCHING THE METERING MODE

Using the Spot Metering Mode

The Spot Metering Mode measures light only in the

small area in the center of the viewfinder. When shoot

ing in this metering mode, place the subject you want to
meter within the AF spot frame [C 3] in the center of

the viewfinder.

2. Measure the small area in the center of the view

finder as illustrated.

• If the brightness range between areas in the photo

graph is too great, the exposure should be determined
in consideration of the overall brightness. Otherwise,

the picture will come out improperly exposed.

How to use
1. Set the metering mode switch to the [CE] position.