Sears 934.5512559 - Manual (Page 8)

REMOTE CONTROL OPERATION
You can operate most of your VCR’s functions from the Remote Control (included). The buttons on the Remote
Control have the same functions as the corresponding buttons on the VCR.
HOW TO USE THE REMOTE CONTROL
1 POWER/TIMER REC button -Press to turn
VCR on and off. Press to activate the automatic
timer recording.
2 NUMBER buttons- Press to select desired chan­
nels and to enter digits for setting program. They
cannot be used to set desired channel during Timer
Recording. To select channels from 1 to 9, first press
"0" button then 1 to 9.
+100 button- Press to select cable channels which
are equal or greater than number 100.
3 BLANK SEARCH button -Press to use Blank
Search mode.
4 SLOW button -Press in playback for slow mo­
tion, Slow speed can be controlled by pressing
F.FWD button (faster) or REWIND button (slower).
5 MENU button- Press to display main menu on the
TV screen.
6 SELECT button- Press to select setting modes
(TIMER PROGRAMMING, CHANNEL SET UP,
SETTING CLOCK, REPEAT PLAY, RENTAL,
REMAIN, etc) from menu.
7 REWIND button-Press to rewind the tape or to
view the picture rapidly in reverse during playback.
(Rewind Search)
SLOW [-] Function - Press to control speed in
slow motion, (slower)
8 RECORD button-Press to begin manual record­
ing.
9 STOP button-Press to stop the tape motion.
10 PAUSE/STILL button-Press to temporarily stop
the tape during recording or to view a still picture
during playback.
F.ADV Function-Press to advance one frame
during pause/still mode. To release, press
PAUSE/STILL button again.
11 PLAY button- Press to playback the tape.
12 F.FWD button-Press to rapidly advance the tape
or to view the picture rapidly in forward during play­
back. (Forward Search)
SLOW [+] Function —Press to control speed in
slow motion, (faster)
13 TAPE COUNTER MEMORY button -Press to
set counter memory on and off.
14 ADD/DELETE button-Press to add or delete
channel numbers. Press to cancel a timer program.
TAPE COUNTER RESET button-Press to re­
set counter to 0:00:00.
15 INDEX SEARCH — Press to use Index Search
mode.
16 TIME SEARCH button -Press to use Time
Search mode.
17 CHANNEL buttons-Press to select desired chan­
nel by using either A or T button. They cannot be
used during Timer Recording.
18 EJECT button-Press to remove the tape from
VCR.
19 TV/VCR button-Press to select TV or VCR
mode.
VCR position: to view playback, to monitor video
recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program
while recording another.
- 8
EN
★ .SCI6