Sears 934.5512559 - Manual (Page 16)

?>E1 I ING THE CLOCK
Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as
your time source.
• VCR Power must be on.
• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
(CH 3 or 4)
• Press the TV/VCR button so that "VCR" appears on the display.
• You must use remote control for this procedure.
In the example below, the clock is to be set to;
DATE Wednesday 1 st March, 1995
SETTING TIME 5:40PM
m
Press MENU button on the
remote control. The main
menu appears on the TV
screen.
Select item 3(INITIALIZE)
with number buttons.
Select item 2(SETTING
CLOCK) with number but­
tons. The MONTH digits
flash.
Enter your desired MONTH
with number buttons.
Enter your desired DAY with
number buttons.
Enter your desired YEAR
with number buttons.
The day of the week will
change automatically.
•
SETTING CLOCK
M9NTH DAY YEAR
'''‘Hkkl^'MINUTE AM/PM
SETTING CLOCK
MONTH DAV YEAR
---
HOUR'^ltlj'/fe AM/PM
SETTING CLOCK
MONTH DAY ^ Y^l
0 3 / 0 1
HOUR MINUTE Alii/M
SEHING CLOCK
MONTH DAY YEAR
03 / 01 WED 1995
^ H^UR MINUTE AM/PM
m
MENU
1 TIMER PROGRAMMING
2 VCR SET UP
3 INITIALIZE
Enter your desired HOUR
with number buttons.
MONTH DAY YEAR
0 3 / 0 1 WED 1995
HOUR MIhjUTE AM/PM
0
Simliti* - - 'iiiiiiii - -
. .. J
m
Enter your desired MINUTE
with number buttons.
INITIALIZE
SETTING CLOCK
MONTH DAY YEAR
1 CHANNEL SET UP
2 SETTING CLOCK
3 LANGUAGE SELECT
03 / 01 WED 1995
m
Select AM(1
)
or PM(2) with
number buttons.
/ \
SETTING CLOCK
MONTH DAY YEAR
0 3 / 0 1 WED 1 995
HOUR MINUTE
0&
40 .....'PM
Press ADD/DELETE button to go back one step
from current step during steps [4] to [9].
10
Press MENU or SELECT
button to start the clock.
Although seconds are not
displayed, they begin count­
ing at 00 when you press them. Use this feature to syn­
chronize the clock as accurately as possible.
This unit has a built in calendar up to the year 2009.
• When unplugging the AC-cord or if there is a power
failure for more than 3 s e c o n d s , f l a s h e s on
the display.
• If the display shows an abnormal reading or no read­
ing, unplug the power cord for more than 3
onds. Then plug it back in.
sec-
- 16-
EN
★★★★★ 5B24