Sears 934.5512559 - Manual (Page 21)

DAILY PROGRAM
(MONDAY-SUNDAY)
To record a program at the same time on the same chan­
nel every day, follow steps [1] to [5] on page 19, then
step [6a] below.
2.
Select item 2(DAILY) with
number buttons.
DAILY PROGAAM
PftOOAAM NUM8ER I ■''i, ii .it*'
CHANNEL ..... >> uum
START TIME -
ENOTIME
TAPE SPEED -­
DATE
Continue with step [7] on page 20 onwards.
WEEKLY PROGRAM
To record a program at the same time on the same chan­
nel every week, follow steps [1 ] to [5] on page 19, then
step [6b] below.
m
Select item 3(WEEKLY)
with number buttons.
WEEKLY PROGRAM
PROGRAM
CHANNEL mi
START TIME
ENOTIME
TAPE SPEED
DATE -t-
ry.i ::
Continue with step [7] on page 20 onwards.
CHECKING TIMER PROGRAMS
To check a program that is to be recorded using the
Automatic Timer Program when the VCR is in the
timer-record mode:
1) Turn on the TV and set the TV channel to the same
video output channel located on the back of the
VCR. (CH 3 or 4)
2) Press POWER/TIMER REC button so that the
"0 " indicator disappears from the display.
3) Press the TV/VCR button so that "VCR" appears
on the display.
4) Follow instructions in steps [2] to [5] on page 19.
Information which was set for programming will
now appear.
TO STOP RECORDING
Press STOP button on the VCR.
• If you are recording using the Automatic Timer Pro­
gram, you may not operate the unit manually, but,
you may still stop the recording by pressing
STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not
function in the Automatic Timer Recording mode.
TO CORRECT OR CANCEL
A PROGRAM
• Press ADD/DELETE button to go back one step
from current step during steps [5]~[14].
• If you finished setting program, repeat steps [2] to
[4] on page 19. Then press SELECT button repeat­
edly until your desired digit flashes and reset pro­
gram.
• You may cancel the entire program by pressing
ADD/DELETE button at step [5].
AUTOMATIC TIMER RECORDING
HINTS
• If there a power failure or the VCR is unplugged for
more than 3 seconds, the clock setting and all timer
settings are lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The "0" in­
dicator will flash.
• If a tape is not inserted or the erase-protection tab is
removed, the
"
0
"
indicator flashes and automatic
timer recording cannot occur. Insert a tape that al­
lows recording.
• The TV that is connected to your VCR may be turned
ON or OFF when the VCR is in the timer-record mode.
- 2 1 -
E N
★ ★ ★ ★ ★ 5CI6