Sears 934.5512559 - Manual (Page 18)

VIEWING AND RECORDING THE SAME
PROGRAM
• VCR Power must be on.
• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
(CH 3 or 4)
• Press the TV/VCR button so that "VCR" appears on the display.
m
Insert a cassette tape with the erase-protection tab, if
necessary, rewind or fast forward the tape to the point
at which you want to begin
recording.
Counter mode appears at
counter 0:00:00 on the dis­
play.
Select the channel to be re­
corded by pressing the num­
ber buttons on the remote
control or the CHANNEL A
or T button.
Press SPEED button on the
VCR to select the desired
tape speed (SP-LP-SLP).
Press REC button.
The red "O" indicator lights
on the display.
Press STOP button when re­
cording is completed.
STOP
<______________ __________ )
TO DELETE SCENES DURING
RECORDING
While VCR remains in record
mode, press PAUSE button.
Note: If you do not press PAUSE button again within
five minutes, VCR will automatically return to Stop
mode. You may review the time remaining with
marks on the display. Each "■"mark shows one minute.
Press PAUSE or REC button
to resume recording.
EDIT SEARCH
To edit an unwanted segment from the already recorded
portion of tape while VCR remains in record mode.
While VCR remains in record mode, press PAUSE button.
Press and hold REWIND button until you have reached
the beginning of the unwanted segment. (If you rewind
past the beginning of the unwanted segment, press and
hold F.FWD button until you have reached it.)
Note: If you do not press PAUSE button again within
five minutes, VCR will automatically return to Stop
mode.
Press PAUSE or REC button to resume recording.
- 1 8 -
E N
★ ★★★★ 5C16