Generai mainteriarìce, Lubricofion, General maintenance – Sears 113.206931 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
generai mainteriarìce
Keepyour jointer-planer dean. Put a carton or some kind
of a Container underneath your jointer-planer to catch
the chips. The container should reach above the top of
the motor.
Do not allow pitch to accumulate on the tables, the
fence, the cutter guard, the cutter head or the knives.
Clean them with Craftsman Gum and Pitch Remover.
Ddnot alidwchips to accumulate on the underside of the
jpinter-platier. ‘
Frequently blow out any dust that may accumulate in
side the motor.
For motor maintenance, follow instructions furnished
with motor.
Apply a thin coat of automobile-type wax to the tables
and fence so that the wood slides easily while feeding.
If power cord is worn or cut, or damaged in any way,
have it replaced immediately.
lubricofion
The BALL BEARINGS in this machine are packed with
grease at the factory. They require no further lubrication.
The following parts should be oiled occasionally with
SAE N
o
. 20 or No. 30 engine oil,
t. Dovetail spacer and dovetail slide,
2. Elevating screw (first clean with Craftsman Gum and
Pitch Remover).
25