Notes, Troubleshootin – Sears 315.220100 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

[
TROUBLESHOOTIN
j
PROBLEM
CAUSE
SOLUTION
Saw blade tends to push wood to
one side when cross cutting.
1. Blade is heeling.
2. Column tube is loose In column
support.
3. Arm is loose or misaligned.
4. Fence/tables are not straight.
5. Blade or teeth are bent or dull.
1. See Squaring the Blade to the
Fence in Adjustments section.
2. See Adjusting the Column
Tube in Assemb/y section.
3. See Setting the Arm Lock
Wheel in the Assemb/j/section.
4. Check with square; sand or
replace.
5. Sharpen or replace the blade.
See the removal procedure in
Assemb/y section.
I
NOTES
j
CliPTSiir
RADIAL SAW 315.220100
62