Carrier 50DP016 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fig. 1 — Roof Curb Details

INDOOR AIR

FAN

MOTOR

INDOOR AIR
FAN MOTOR

(50PQ900I5I )

TRANSITION DUCT

Fig. 2 — Side Supply/Return Curb Details

Do not install unit in an indoor location. Do not locate

unit air inlets near exhaust vents or other sources of
contaminated air.

Although unit is weatherproof, guard against water

from higher level runoff and overhangs.

ROOF MOUNT — Check building codes for weight dis

tribution requirements. Unit weight is shown in Table 1.

NOTE: Rig by inserting hooks into unit base rails as shown. Main
tain a distance of 120 m. (3048 mm) from top of unit to eyehook.
Use corner post from packaging to protect coil of unit from
damage by rigging cable Use bumper boards for spreader bars.

CAUTION!

All panels must be in place when rigging.

Fig. 3 — Rigging Details