Cabletron Systems ELS100-24TXG - Manual (Page 47)

9032947 ELS100-24TXG User Interface 33
Spanning Tree Configuration Menu
The Spanning Tree Configuration Menu allows you to view and modify
Spanning Tree parameters. Select b from the Switch Configuration Menu
to view the Spanning Tree Configuration Menu. A letter identifies
selections that can be modified. All other fields are read-only. Figure 3-8
shows the Spanning Tree Configuration Menu and the accompanying
table describes the Spanning Tree Configuration Menu.
Figure 3-8. Spanning Tree Configuration Menu
continued on next page
SPANNING TREE CONFIGURATION Access Control: READ/WRITE
Bridge ID 32768-000000000000
Designated Root
Root Path Cost
0
Root Port NO PORT
Topology Change Count 0
a. Spanning Tree Protocol Enable No
b. Port Configuration Menu
c. Hello Time (seconds)
2
d. Forward Delay (seconds) 15
e. Max Age (seconds) 20
f. Bridge Priority 32768
x. Previous Menu
Enter Selection:
Field Description
Bridge ID A unique identifier for the bridge (switch) in the Span-
ning Tree. The ID is a combination of the bridge prior-
ity and port 1 MAC address.
Designated Root The bridge in the Spanning Tree with the lowest
Bridge ID value, designated as the root bridge.
Root Path Cost The cost of the path to the root bridge.
Root Port The port identifier of the port that offers the lowest cost
path to the root bridge.
Topology Change
Count The count of the number of times the network topolo-
gy has changed from a Spanning Tree reconfigura-
tion.