Cabletron Systems ELS100-24TXG - Manual (Page 44)

30 ELS100-24TXG User Interface ELS100-24TXG
Switch Configuration Menu
The Switch Configuration Menu allows you to modify switching-related
configuration parameters. Select b from the Main Menu to view the Switch
Configuration Menu. Figure 3-6 shows the Switch Configuration Menu
and the accompanying table describes the Switch Configuration Menu.
Figure 3-6. Switch Configuration Menu
SWITCH CONFIGURATION Access Control: READ/WRITE
a. Forwarding Table Configuration Menu
b. Spanning Tree Configuration Menu
c. VLAN Configuration Menu
d. Class of Service Configuration Menu
e. Forwarding Table Aging Time(seconds)
300
f. Broadcast Cutoff Rate 500000
g. Port Mirroring Enable No
h. Mirrored Port 2
i. Mirroring Port 1
j. Transmit Data Mirror Enable Yes
k. Receive Data Mirror Enable No
x. Previous Menu
Enter Selection:
Selection Description
Forwarding Table
Configuration Menu Menu for configuring the switch forwarding table.
Spanning Tree Configura-
tion Menu Menu for configuring the switch Spanning Tree operation.
VLAN Configuration Menu Menu for configuring the VLAN operation of the switch.
Class of Service
Configuration Menu Menu for configuring Class of Service for the switch.
Forwarding Table Aging
Time Time in seconds until entries in the forwarding table are
aged out if not accessed (10-1,000,000 second range).
Broadcast Cutoff Rate Per second rate past which broadcast and destination un-
known unicast frames are not flooded on each group of 8
ports on the switch (100-500,000 frames per second range).
Port Mirroring Enable Allows you to enable (Yes) or disable (No) port mirroring.
Mirrored Port The source port for the data to be mirrored.
Mirroring Port The destination port for the data to be mirrored.
Transmit Data Mirror
Enable * Allows you to enable (Yes) or disable (No) the mirroring of
data transmitted out the mirrored port.
Receive Data Mirror
Enable * Allows you to enable (Yes) or disable (No) the mirroring of
data received by the mirrored port.
* Only one of these options can be enabled at any given time. Changing the setting
of one of these options automatically changes the setting of the other option.