YSI IQ SensorNet ViSolid Sensor 700 IQ - Manual (Page 48)

7 - 4 ba76040e04 05/2014
Technical data ViSolid
®
700 IQ (SW)
* Stainless steel can be susceptible to corrosion at chloride concentra-
tions of ≥ 500 mg/l and more.
Cleaning system Ultrasound principle
Automatic sensor
monitoring
(SensCheck function)
 Identification of any measurement fault (in matrix type 1)
 Identification of any failure of the cleaning system
7.4 Instrument safety
7.4.1 General instrument safety
7.4.2 Hazardous location ratings (H models)
Applicable directives
and standards
In addition to the standards listed in chapter 7.4.1, the
ViSolid
®
700 IQ H conforms to the following directives and standards:
 ANSI/ISA-12.12.01
 CAN/CSA C22.2 # 213
The ViSolid
®
700 IQ H is a non-incendive electrical equipment for use
in Class I Division 2 hazardous locations.
Hazardous location
rating
Measurement window
Sapphire
Plug head connector housing POM
Plug, 3-pole ETFE (blue) Tefzel
®
Applicable norms – UL 61010-1
– CAN/CSA C22.2 # 61010.1
ViSolid
®
700 IQ H Class I Division 2
Group D T6
Class I Zone 2
Group IIA T6
Associated apparatus MIQ/BB2, YSI part no. 207002Y
Control Drawing YSI document no. 28124