YSI IQ SensorNet ViSolid Sensor 700 IQ - Manual (Page 10)

2 - 2 ba76040e04 05/2014
Safety ViSolid
®
700 IQ (SW)
2.2 Safe operation
2.2.1 Authorized use
The authorized use of the ViSolid
®
700 IQ (SW) consists of its use as
a total suspended solids sensor in the IQ S
ENSOR
N
ET .
Please observe the technical specifications according to chapter 7
T
ECHNICAL DATA . Only operation according to the instructions given in
this operating manual is considered to be authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
2.2.2 Requirements for safe operation
Note the following points for safe operation:

The product may only be operated according to the authorized use
specified above.
 The product may only be supplied with power by the energy sources
specified in this operating manual.
 The product may only be operated under the environmental condi-
tions specified in this operating manual.
 The product or its components may only be opened if this is required
for installation and maintenance work and described in the operating
manual.
2.2.3 Unauthorized use
The product must not be put into operation if:

it is visibly damaged (e.g. after being transported)
 it was stored under adverse conditions for a lengthy period of time
(storing conditions, see chapter 7 T
ECHNICAL DATA )
NOTICE
The sensor warms up during operation in the air.
Consequently, pollution can collect in the vicinity of
the measurement window due to the evaporation of
liquid. Therefore, avoid any lengthy operation in the
air.