YSI IQ SensorNet ViSolid Sensor 700 IQ - Manual (Page 13)

ViSolid
®
700 IQ (SW) Commissioning
ba76040e04 05/2014 3 - 1
3 Commissioning
3.1 IQ S
ENSOR
N
ET
system requirements
Software statuses of the
controller and terminal
components
The operation of the ViSolid
®
700 IQ (SW) requires the following soft-
ware versions in the IQ S
ENSOR
N
ET :
3.2 Scope of delivery
 Total suspended solids sensor, ViSolid
®
700 IQ (SW)
 Operating manual
3.3 Installation
3.3.1 Safety guidelines for installation in a hazardous location
(H-models only)
 MIQ/MC 2 Controller software: Version 3.42 or higher
 MIQ/T C 2020 XT Terminal software: Version 3.42 or higher
 DIQ/S 182 Controller software: Version 3.47 or higher
 ViSolid ®
700 IQ (SW) Sensor software: Version 2.50 or higher
DANGER
Explosion hazard.
Only hazardous location rated sensor models
("Hazloc Sensor") must be used in hazardous
locations. Verify the rating on the product name
plate on the sensor shaft.
The associated apparatus MIQ/BB2 (YSI part no.
207002Y) has to be used for connection. Refer to the
following documents for proper installation:
 Control drawing, YSI document no. 28124
(see MIQ/BB2 operating manual)
 MIQ/BB2 operating manual
 All applicable electrical code regulations.