XMART Optima 33 30K - Manual (Page 27)

USER MANUAL - OPTIMA-33 10K / 20K / 30K
www.xmart-ups.com 130612-OPTIMA-33 10K/20K (ENGLISH) - 25
Bypass mode Description
When input voltage is within acceptable range and bypass is enabled, turn off the UPS and it will enter
Bypass mode. Alarm beeps every two minutes.
LCD display
Battery Test Description
When UPS is in AC mode or CVCF mode, press “Test” key for more than 0.5s. Then, the UPS will
beep once and start “Battery Test”. The line between I/P and inverter icons will blink to remind users.
This operation is used to check the battery status.
LCD display