Viconics VWG-50 (Classic ZigBee) BACnet Integration Manual - Manual (Page 28)

28
Integration – Graphical User Interface (GUI) Objects
The following objects should be typically used in a GUI:
 Room Temperature
 Occupied and Unoccupied Heat Setpoints
 Occupied and Unoccupied Cool Setpoints
 Room Humidity (If available)
 Room Humidity Setpoint (If available)
 Outdoor Temperature
 Supply Temperature (If available)
 Occupancy
 System Mode
 Fan Mode
 Fan Status
 PI Heating Demand
 PI Cooling Demand
 AlarmService Alarm;
Figure 2: Typical example of a graphical user interface