Viconics VWG-50 (Classic ZigBee) BACnet Integration Manual - Manual (Page 2)

2
Product Overview
The VWG-50 and related wireless controllers are targeted to retrofit applications where the
addition of communicating field bus wiring within the building space is prohibitive. The
Gateway and Communicating Controllers with wireless field bus encourages the use of
existing wiring utilized by existing electronic controller type controls.
The VWG-50-XX-5000 when utilized in conjunction with the VT7xxxXxxxxW series
wireless controllers will offer the integrator simple BACnet IP or BACnet MS/TP objects to integrate over
standard building automation systems using familiar integration toolsets.
A maximum of 30 wireless controllers can be wirelessly attached to a single VWG
The following additional documentation is available on
www.viconics.com
 Information on design consideration of wireless mesh networks and VWG set-up / diagnostics is available in document
LIT-VWG-50-SETUP-Exx
 Information on VWG hardware installation is available in document LIT-VWG-50-INSTALL-Exx
Contents
Subject
 VWG Protocol Implementation Conformance Statements (PICS)
o Objects Table
 Object Table
o Device Object Properties Supported
o Objects
Supported
o Objects Supported By Model
 Standard Object Types Supported
 List of Property Analog Value Range Restriction
 List of Property Enumeration Sets for BV Objects
 List of Property Enumeration Set for MV Objects
 Integration - Global commands
 Integration - Graphic User Interface (GUI) Objects
 BACnet IP Settings
 TCP/IP Configuration
 BACnet MS-TP Settings
 Tips And Things You Need To Know
 Document Control
Please refer to the VWG hardware installation guide ( LIT-VWG-50-INSTALL-Exx ) for all wiring information.