Viconics VTR7300 BACnet Integration Manual - Manual (Page 22)

22
VT73xxX Integration
– Graphical User Interface (GUI) Objects
The following objects should be typically used in a GUI:
 Room Temperature (AV7);
 Occupied and Unoccupied Heat Setpoints (AV 39 and AV43);
 Occupied and Unoccupied Cool Setpoints (AV 40 and AV34);
 Room Humidity (AV10) (If available);
 Room Humidity Setpoint (AV 71) (If available);
 Outdoor Temperature (AV 9);
 Supply Temperature (AI12) (If available);
 Occupancy Command (MV18);
 System Mode (MV16);
 Fan Mode (MV17);
 Fan Status (MV28);
 Output 2 (MV26);
 Output 1 (MV28);
 PI Heating Demand (AV21)
 PI Cooling Demand (AV22)
 Window Alarm (BI 35);
 Filter Alarm (BI 36);
 Service Alarm (BI 37);
Figure 2: Example of a graphical user interface