Viconics VT7600 Echelon Integration Manual - Manual (Page 15)

15
Integration – Global Commands
The following figure shows which objects from the thermostat can be monitored and commanded from the
BAS front-end.
Figure 1: Global commands from a BAS front-end to a VT7600 series tstat
Integration – Graphic User Interface (GUI) Objects
The following objects should be typically used in a GUI:
nvoSpaceTemp
occupied_heat (nciSetpts);
unoccupied_heat (nciSetpts);
occupied_cool (nciSetpts);
unoccupied_cool (nciSetpts);
nvoDischAirTemp
nvoEffectOccup
heat_output_primary (nvoUnitStatus)
cool_output (nvoUnitStatus)
fan (nvoSccStatus)
cool_1 (nvoSccStatus)
cool_2 (nvoSccStatus)
heat_1 (nvoSccStatus)
heat_2 (nvoSccStatus)
service_alarm (nvoSccStatus)
filter_alarm (nvoSccStatus)
d2_direct (nvoSccStatus)
d1_direct (nvoSccStatus)
frostpro_alarm (nvoSccStatus)
econ_output (nvoUnitStatus)