USL CM-10 - Manual (Page 5)

- 5 -
You will need to supply the following materials:
• Shielded audio cable for connecting the CM Series to the
cinema processor and power amplifier outputs.
• Four 10-32 x 1/2" screws to mount the CM Series in the audio
equipment rack.
FEATURES
The CM Series monitor has the following standard features:
• Ten-Channel Monitoring - allows you to monitor either the
processor or power amplifier outputs to left, left center, center,
right center, right,surround left, surround right, back surround
left, back surround right and subwoofer channels, in any
combination via the switches on the front panel (see illustration
on pg. 5)
• Input levels from processor and power amplifier can be
adjusted independently - no huge level jumps when switching
between processor and power amplifiers.
• Bargraph display may be calibrated to the reference level
for your theatre – the projectionist can see auditorium levels
instantly.
• Designed to work with bi or tri-amplified sound systems to
monitor the high, mid and low frequency outputs from the left,
left center*, center, right center* and right channels.
• Line output for remote monitoring with an external amplifier
and speaker.
*Left center, right center only available with installation of optional
card.