USL PSA-200U - Manual (Page 13)

Page 13 1st Edition. October, 2004 USL, Inc. PSA-200U Instruction Manual
(Fig. 9) Flicker
Report Function
This function allows all measurement data
and equipment configuration to be sum-
marized in a concise report suitable for
printing or exporting to a database.
Saving Data to the Report
Luminance and other data can be saved to
the report. Select the function to be saved
so that the data shows on the screen, then
press the S key on the keyboard or click
on the Save button on the toolbar. You can
also select “Save” from the “View” menu to
save data to the report. To overwrite exist-
ing data on the report, select the desired
function and save it to the report. The old
data for that function will be replaced with
the new data.
Adding Text to a Report
Once data has been saved to a report, text
information about the equipment and the
measurements can be added. First, press
F9, or click on Report, to view the saved
data (see Figs. 10a and 10b). Press F9 again,
or click again on Report, to bring up the
“Report Edit” dialog box (see Fig. 11). Press
the tab key to move through the different
text entry blocks or click on the desired text
entry block with the mouse, then enter the
text. When you are finished, press the enter
key or click on the OK button.
The Clear Data button deletes all of the text
of the report. The Cancel button deletes all
of the text of the report and returns to the
PSA-200U report screen.
(Fig. 10a) Report - Top
(Fig. 10b) Report - Bottom
(Fig. 11) Report Edit