Triner Scale TS-700 Series V2.0 - Manual (Page 6)

Operating Guide | TS-700 Series
4
Quick Start: Connecting & Powering On
TS-700 MS (CONT’D)
device to the RS-232 port located on the underside
of the digital indicator. Power on the device.
Connect AC Adapter
Plug the AC adapter included with the digital
indicator into the 9VDC 1200ma port located on the
underside of the digital indicator.
Power On The Digital Indicator
Press and hold the ON/OFF key for 2+ seconds to
power on the indicator. A self-test routine will run,
followed by “0” indicated weight. If a small amount
of weight displays, press the Zero (word) key. Scale
is ready to operate.
IMPORTANT NOTE: if equipped with optional
built in rechargeable battery, fully charge for 18
hours before operating on battery power.
Operation
Refer to page 9 for operating instructions and
functions details.
Certain settings in the TS-700 MS can be adjusted
according to user preferences. Refer to page 14 for
a listing of adjustable parameters and available
settings options.