Triner Scale TS-700 Series V2.0 - Manual (Page 14)

Operating Guide | TS-700 Series
12
Parameters and Settings
CAUTION: Use care when accessing and
adjusting your indicator’s parameters.
Several parameters can be accessed that, if
altered, will change your indicator’s
operations.
HOW TO ACCESS AND ADJUST THE
TS-700 MS PARAMETERS
Press and hold down the PRINT and HOLD keys.
“C” will display. Release the keys. “C08” or “C01”
will display*, with last digit flashing. The digit
flashing is the active digit, and can be adjusted up
or down by using the Zero/up arrow key or
Tare/down arrow key. Use the kg-lb/left arrow key
and the Gross/right arrow key to change which digit
is active (flashing).
*TIP: Parameters C01 through C07 are for
typically locked out and are only accessible
by scale technician during calibration.
Navigate to the setting parameter you wish to adjust
and use the arrow keys to change the settings values.
Press the Print/enter key to accept your settings, then
press the Total/home key to exit.
EXAMPLE: To adjust the date setting in
parameter C16:
With the 8 flashing in “C08”, press the
Tare/down arrow key to reduce the 8 to 6.