Operating guide | ts-700 series, Appendix for scale technicians – Triner Scale TS-700 Series V2.0 User Manual
Page 27
Operating Guide | TS-700 Series
A-6
Appendix For Scale Technicians
PARAMETER FUNCTION
OPTIONS
C05
Zero Calibration
0 = skip zero calibration
1 = proceed with zero
calibration
Description:
With C05 flashing, press the
key, then use the up
arrow key to change the 0
parameter setting to 1.
Press the
key to
proceed. The zero cal will
count down from 10.
Press the
key to
proceed to the next
parameter.