Triner Scale 600-E Series - Manual (Page 27)

Page 5-2
A12
Bag Limit
Threshold
Actuates a function that allows entry of the Bag Limit Threshold in
pounds. To change the threshold use the “Print” or “Lb/Kg” key to
move the flashing digit left or right. Use the “Zero” key to increment
the digit. Use the “Accu” key to set the desired value. 70 √
5.2 USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
5.2.1 ID Number Entry (A8)
1. While in the User Menu mode, scroll to "A 8", then scroll down once using the
ZERO key to enter the ID Number menu.
2. The display will momentarily show "ID NO", followed by a value with one flashing
digit. This value will be the current ID number value.
3. Use the four directional keys (shown in Figure 5-1 below) to adjust the displayed
value to the actual ID Number value. Increase the flashing digit by pressing the
ZERO key. Pressing the PRINT key or the Lb/Kg key will change the position of the
flashing digit.
KG
LB
ZERO
O I
PRINT
ACCU SET
Figure 5-1: User Menu Key Assignments
4. After setting the exact value, press the ACCU key to save the ID Number value. The
display will show "SET" momentarily, then revert back up to A8.
5.2.2 LF (Line Feeds) Number Entry (A9)
1. While in the User Menu mode, scroll to "A 9", then scroll down once using the
ZERO key to enter the Line Feeds menu.
2. The display will momentarily show "LF", followed by the current line feeds value.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual line feeds value. Increase the flashing digit by pressing the
ZERO key. Pressing the PRINT key or the Lb/Kg key will change the position of the
flashing digit.
4. After setting the exact value, press the ACCU key to save the line feeds value. The
display will show "SET" momentarily, then revert back up to A9.