Triner Scale 600-E Series User Manual
Page 16
Page 2-8
Fig. 2-9: Keypad Cut Out Detail
2. Refer
to
Fig. 2-9 to cut the holes and mount the keypad module into the counter.
Note 1: Counter cut-outs to be located and cut by the customer or contractor unless
otherwise specified.
Note 2: An optional “L” Bracket is included for installations where the flush panel mount
is not convenient. The “L” bracket is used for under/side counter installations.
Note 3: Locate the remote switch module so that it is convenient
to the ticket agent and not accessible to the passenger.