Toa C-CC574 PL - Manual (Page 11)

11
Note
When mounting the camera unit to the base unit,
mount it straight till it is attached to the base unit
correctly. Mounting it at an angle may cause
damage to the camera unit.
8. Turn the camera unit clockwise pushing it up to the base unit until it locks into place.
Mount straight
An
g
led insta
llation
Note
Take care not to pinch the safety wire between the
camera unit and base unit to avoid damage to the
camera.
7. Align the positioning marks, then push the camera unit up into the base unit.
Push up
Screw section inside the base unit
is to be inserted into the oval hole
in the camera unit.