Toa S5 Series Installation - Manual (Page 20)

Page 19 – S5 Wireless Microphone Installation Guide Rev 1.5
Operating Hints
To maximise operating performance Trantec recommends the following:
• Ensure good line of sight between the receiver antennae and
transmitter, and avoid obstructions, e.g. concrete walls and metal
structures.
• Always ensure the receiver antennae are at least 3 M (10 ft) away from
the transmitters at all times.
• Always ensure the transmitters are separated by at least 50 cm.
• Never position the transmitter antenna directly against the body or the
hand. This will reduce the operating range.
• Ensure the correct setting of the Mute for effective control of
interference whilst the transmitter is turned off. The default is normally
5 but may need to be increased with multi-channel set-ups.
• Do not mix separate Banks in multi-channel set-ups.
• Use the SCAN function to check for external interference.
• Set the transmitter AF gain so the receiver VU indicates 0 db with
occasional peaks to +6 dB.
• Keep the microphone/instrument lead away from the antenna on the
beltpack.
• Do not mix with other brands of Wireless Microphone as Trantec
cannot guarantee multi-channel compatibility.