Toa YP-M301 User Manual
Yp-m301 headset microphone, Instruction manual, Specifications 1. general description

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
YP-M301
HEADSET MICROPHONE
INSTRUCTION MANUAL
Head pad
Headband
Slide arm
Microphone boom
Microphone
Windscreen
Angle adjustable (360
°)
3.5 mm-diameter monaural plug
Maximum 60 mm
133-05-309-0A
Type
Electret condenser type
Directivity Unidirectional
Sensitivity
–41 dB (0 dB=1 V/Pa,
1 kHz, load: 2 k
Ω)
Maximum Input Sound 117 dB SPL
Pressure
Terminal
ø3.5 mm monaural plug
Cord Length
1.2 m
Finish
Headband: ABS resin,
black
Weight
45 g (cable included)
4. SPECIFICATIONS
1. GENERAL DESCRIPTION
The YP-M301 is a headset microphone designed to
be exclusively used with an optional WM-1100
Portable Transmitter.
3. HOW TO USE
• Put on the headset and adjust the slide arms so
that the head pads are positioned just over the
ears.
• Adjust a microphone boom, and position the
microphone (windscreen attached) at the mouth.
• Keep the microphone 3 – 5 cm away from the
mouth when using.
• Speaking loud or positioning the microphone too
close to the mouth could muffle sounds and make
them inaudible.
• The headset is not recommended for use in
aerobics or other vigorous performance
applications.
• Use the supplied case when storing the unit.
2. NOMENCLATURE
Note: The design and specifications are subject to
change without notice for improvement.
Storage case .............................................. 1
Windscreen (black) .................................... 2
• Accessory