Toa S5 Series Installation - Manual (Page 13)

Page 12 – S5 Wireless Microphone Installation Guide Rev 1.5
All three of the above functions
change in real time as the option is
selected. Rotate the “Jog-Wheel” to
underline EXIT after making your
selections, and press to return to the main screen.
Headphone Volume
Rotate the “Jog-Wheel” while the
main screen is showing to go to the
headphone volume adjustment. A bar
graph of the volume is shown and can
be altered by again turning the “Jog-Wheel”. Push to exit and return to the
main screen. The unit will return to the main screen automatically if there is no
user intervention for approximately 2 seconds. Any change you have made
will be saved.
Scanning
The scanning feature can determine which frequencies are currently being
used in the vicinity of your receiver.
From the main screen press the “Jog-
Wheel” to go to MAIN MENU, rotate
till FREQ SEL, is underlined and
push. Then rotate till SCAN is
underlined and push. The scanning
process takes about 10 seconds and
you will then be shown the Bank
selection screen. If interference is
found on a frequency during the scan,
the bank containing that frequency is
made unavailable on the receiver.
You can then select any bank from
those available, and any frequencies from within those banks.