Toa S5 Series Installation - Manual (Page 11)

Page 10 – S5 Wireless Microphone Installation Guide Rev 1.5
4. Program a transmitter with Bank information via receiver Infra-red
port
Press and hold the “Jog-wheel” for approximately 3 seconds if the receiver is
not in mute to enter the MAIN MENU. You will enter the MAIN MENU
immediately if the receiver is in mute.
Rotate the “Jog Wheel” till TX SET is
underlined and press to enter TX
SETTINGS. With FREQUENCY
underlined, press the “Jog Wheel”.
Align the transmitter and receiver
infra-red windows with the
transmitter no more than 15 cm from
the receiver. With SEND underlined,
press the “Jog Wheel” and wait a few
seconds. All frequencies in the bank selected will be transferred to the
transmitter and its current frequency will be set to match the receiver’s current
frequency. The receiver will return to its main display.
For S5.5 - If the receiver is currently in a SINGLE or USER frequency, it will
transfer the USER bank.
For Japanese units - only fixed banks 1 to 6 are available.
For S5.3 - If the receiver is currently in a SINGLE frequency, it will transfer
Bank1.