Toa SR-L1B User Manual

Page 8

[Speaker array arranged in 2 speakers horizontal
x 3 rows vertical (6 speakers in total)]

[Speaker array assembly diagram]

[Hardware to be used]

Truss Module AMFS-SRF1-TH: 12
Connecting Bar AMFS-1X2-30: 6
Shackle Mount AMFS-1X2-SEM: 6
Stacking Bracket AMFS-1X2-SB: 4
Quick Release Pin 2.5QRP:

1
2
3

Note
For mounting truss module, refer to
the previous page.

5.2.2. Flying precautions

• Confirm the following points before installation.

1. Load on each flying hardware component does not exceed its allowable load.
2. All quick release pins (2.5QRP) are fully inserted into other components and locked.
3. All components used in suspension (i.e. enclosures, individual flying hardwares, clamps, connectors, and

suspension devices) are free from any deformation, crack and corrosion.

• The maximum number of speakers that can be suspended per shackle mount (AMFS-1X2-SME) or stacking

bracket (AMFS-1X2-SB) is four.

• Not more than three speakers are joined and suspended vertically.

5.2.3. Flying example

This manual is related to the following products:

SR-F1D