Warning – Toa SR-L1B User Manual
Page 7
7
5.2. Suspension Using Optional Flying Hardware
5.2.1. SR-F1D speaker flying hardware system
The speaker flying hardware system is manufactured by ATM FLY-WARE
TM
(ATM GROUP, Inc.) of the United
States for use with TOA's SR-F1D speaker. The flying system permits various speaker array configurations to
be constructed quickly and safely without using special components.
[System composition]
The flying system comprises 5 main components.
AMFS-SRF1-TH Truss Module
Allowable load 275 kg
The truss module attaches to both the top and
bottom of the SR-F1D speaker.
Note
Bolts, nuts, and other fixing hardware are included.
AMFS-1X2-30 Connecting Bar
Allowable load 278 kg
Used for horizontal speaker connection.
AMFS-1X2-SME Shackle Mount
Allowable load 225 kg
Used to set suspension points for vertical speaker
suspension. (Upper and lower speakers can be
suspended at different tilt angles.)
AMFS-1X2-SB Stacking Bracket
Allowable load 194 kg
Used to suspend multiple speakers connected close
to each other.
2.5QRP Quick Release Pin
Allowable load 835 kg
Has a lock function and connects individual parts
surely and quickly.
5
4
3
2
1
1
2
3
4
5
Hexagon bolt 3/8'' x 41/2''
Nut 3/8''
Spring washer 3/8''
Wedge
Truss module
Pan fitting ring
(at top and bottom of SR-F1D)
[Mounting truss module]
Use 2 pan fitting rings on the SR-F1D's top or bottom to
mount the truss module. Pass a hexagonal bolt*
through the module and pan fitting ring, then secure it
with a wedge*, spring washer*, and nut*.
* Supplied with the truss module
Be sure to use the supplied hardware when
mounting the truss module. The speaker may fall
off if other hardware is used, resulting in possible
personal injury.
WARNING