Toa SR-L1B - Manual (Page 16)

12. SPECIFICATIONS
Enclosure Bass reflex type
Power Handling Continuous pink noise: 120 W (Low frequency)* 1 , 80 W (High frequency)* 2
Capacity Continuous program: 360 W (Low frequency), 240 W (High frequency)
Rated Impedance Low frequency: 8 Ω, High frequency: 16 Ω
Sensitivity Low frequency: 98 dB (1 W, 1 m), High frequency: 110 dB (1 W, 1 m)
Frequency Response 70 – 20,000 Hz at DP-0206's use
Crossover Frequency 1,000 Hz at DP-0206's use
Speaker Component Low frequency: One 30 cm dia. cone-type
High frequency: CD horn (60° horizontal by 40° vertical) plus compression driver
Input Connector NEUTRIK NL4MPR
Finish Enclosure: FRP coating, gray
Front grill: Black, paint
Dimensions 390 (w) x 619 (h) x 364 (d) mm
Weight 37 kg
Printed in Japan
133-01-431-60
[SR-F1D]
* 1 Band limited (50 – 1,000 Hz) pink noise signal (24 hrs.)
* 2 Band limited (1,000 – 20,000 Hz) pink noise signal (24 hrs.)
* 3 Band limited (40 – 1,000 Hz) pink noise signal (24 hrs.)
Note: The design and specifications are subject to change without notice for improvement.
Enclosure Bass reflex type
Power Handling Continuous pink noise: 150 W x 2* 3
Capacity Continuous program: 450 W x 2
Rated Impedance 8
Ω x 2
Sensitivity 96 dB (0.5 W x 2, 1 m)
Frequency Response 35 – 1,000 Hz
Crossover Frequency 125 Hz at DP-0206's use
Speaker Component Two 30 cm dia. cone speakers
Input Connector NEUTRIK NL4MPR
Finish Enclosure: FRP coating, gray
Front grill: Black, paint
Dimensions 829 (w) x 629 (h) x 606 (d) mm
Weight 79 kg
[SR-L1B]