Toa SR-L1B - Manual (Page 2)

2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................... 3
2. GENERAL DESCRIPTION ............................................................................. 5
3. FEATURES .......................................................................................................... 5
4. INSTALLING THE SR-F1D ON THE SR-L1B ........................................... 5
5. FLYING (SR-F1D ONLY)
5.1. Direct Suspension Using the SR-F1D's Flying Hardware ................................. 6
5.2. Suspension Using Optional Flying Hardware
5.2.1. SR-F1D speaker flying hardware system ............................................... 7
5.2.2. Flying precautions ................................................................................... 8
5.2.3. Flying example ........................................................................................ 8
6. SPEAKER STAND FOR SR-F1D ................................................................. 9
7. INPUT CONNECTOR ...................................................................................... 10
8. CONNECTION DIAGRAMS
8.1. Single System (SR-F1D) .................................................................................. 10
8.2. Combination System (SR-F1D and SR-L1B) ................................................... 10
9. PROCESSOR SETTINGS .............................................................................. 11
9.1. Flat Phase Type ............................................................................................... 12
9.2. Minimum Delay Type ....................................................................................... 13
10. CHARACTERISTIC DIAGRAMS
10.1. SR-F1D + SR-L1B (when DP-0206 is used)
10.1.1. Flat phase type .................................................................................. 14
10.1.2. Minimum delay type ........................................................................... 14
10.2. SR-F1D (when DP-0206 is used) .................................................................. 15
11. DIMENSIONAL DIAGRAMS ......................................................................... 15
12. SPECIFICATIONS ............................................................................................ 16