Toa EV-20R - Manual (Page 15)

15
12. PLAYBACK OPERATIONS AND CONTROL I/O TIMING
12.1. Stopping Broadcasts during Manual Playback or Switching Message Playback
Message 1 playback
Stop
Activation Stop
Activation
Activation
Message 3 playback Message 1 playback
Delay
time
Delay
time
Switching to Message 1
Output
Busy output
Start/Stop Key 3
Start/Stop Key 1
[Operation]
• Pressing the Start/Stop key closes the Busy Output terminal until playback is completed. If the same key is
pressed during playback, the playback stops and the Busy Output terminal opens.
• If the Start/Stop key of another message is pressed during playback, playback stops, allowing the most
recently activated message to be played back with no delay time.
Note: Current playback can also be made to stop by closing the Stop Input terminal.