TeeJet CenterLine v1.10 - Manual (Page 22)

18 CenterLine
CenterLine Setup
CenterLine
Software Version 1.10
Status
The setting is used to auto detect implement status. When the status detect is properly
implemented, the CenterLine detects whether product delivery is on or off, based on the vehicles
product on/off switch. See “CenterLine Product Kits” on page 9 - 12 for location of status connect
(boom sense) wiring.
To adjust the Status setting, go to Guidance setup, scroll with Up or Down until is dis-
played in the text window, and press Enter. Using Up or Down, scroll between the and
settings until the desired setting is displayed in the text window. Press Enter to save the
setting and return to the Guidance setup menu.
Alarm
The setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays when the implement swath is in a previously applied
area of the field.
To adjust the Alarm setting, go to Guidance setup, scroll until is displayed in the text
window, and press enter. Using Up or Down, scroll between the and settings until
the desired setting is displayed in the text window. Press Enter to save the setting and return to
Figure 19: Selecting the Status Setting
Setting Description
OFF No Status Detect implemented. Default setting.
ON Status detect assumes a single swath centered on the vehi-
cle.
Table 3: Status Settings