TeeJet LH 4000 - Manual (Page 40)

LH 4000 O PERATORS MANUAL
40 LH A GRO
TEST OUTPUT
OUT1: The power "increase" output to
regulator valve.
OUT2:
The power "decrease" output to
regulator valve.
OUT3:
Output to "fill" valve(if applicable)
OUT 4:
Not used.
NOTE! The
"SYSTEM" test feature comprises of three screens.
Move to next screen using the "NEXT PAGE"-key.
NOTE! Activation of any in- or outputs in the test "SYSTEM"- mode disregards
any possible malfunctions you may have provoked through a
wrong/mistaken encodement.
Any possible failure caused by defects in the computer software is
therefore disregarded!
SPEED SIMULATION
E.g. whilst testing or calibrating machines it may be desirable to conduct a
performance test at a stand-still.
To simulate speed, do as follows:
Put SPEED-SIMULATE "ON" in the menu. Return to your "OPERATION"-menu.
Enter the desired speed through the numeric-keys!
How to disable the "SIMULATED SPEED".
Either:
1.
Move vehicle forward, the "SIMULATE" speed will be cancelled
automatically.
or
2.
Encode a simulated speed of "0" (nil). After 8 sec., you can return to
"SYSTEM" for setting "SIML. SPEED" to "OFF".
SYSTEM DATA
Information not accessible by the operator.