TeeJet LH 4000 - Manual (Page 13)

LH 4000 O PERATORS MANUAL
LH A GRO 13
Pressing the "NEXT PAGE" key displays the next functions.
+: Manual increase of pressure
(application).
-: Manual decrease of pressure
(application).
AUTO/MAN: Select automatic or manual
application control. (+/- keys will
appear when you select manual-mode
This facility may be used e.g. under
severe field conditions where
automatic (computer control) is
inefficient, or you have observed
abnormalities in the computer control
mode.
NOTE!
Be aware. Should you have selected "MANUAL" mode is the computer
unable to resume to control before you reset to "AUTOMATIC" control
mode
Pressing the "NEXT PAGE" key displays the next functions.
RPM: Shaft speed of an axle (only
displayed if RPM ON is selected in
encode).