TeeJet TASC-6500 - Manual (Page 5)

1-1
98-05019
Rev- 1
CE & S
TANDARD
V
ERSION
TASC 6200/6500
INTRODUCING TASC FOR THE NEW GENERATION APPLICATORS
The TASC 6500 is a five channel controller. Two channels are designed to operate positional control valves, such as
hydraulic or liquid flow control valves, while the other three channels are designed to operate either positional
control valves or DC motors. This gives the MID-TECH TASC 6500 the flexibility to control almost any mobile
applicator using a single console.
All five channels control spread or spray rates in relation to ground speed and width. Each channel has two program-
mable rates or can be changed by a percentage amount "ON THE GO". The TASC 6500 is easy to calibrate and
operate and incorporates many self check features to help the operator keep the system running at peak performance.
The TASC 6200 is a simpler version of the TASC 6500 console. The TASC 6200 has two channels designed to
operate positional control valves only.
MIDWEST TECHNOLOGIES, INC.
TASC 6200/6500 SPREADER CONTROL
TASC-6500
CHEMICAL APPLICATORS
ON
OFF
Alt.- Rate
%Rate
DISPLAY SELECTOR
Speed
Area Width
Distance
Vol. Applied
Test Speed
Fan RPM
Vol. Applied
Appl. Rate Appl. Rate
OFF SET- UP DEC.
ON OPERATE INC.
1 2 3 4 5 6 7 8 9
BOOMS
Scan
MID-TECH
MIDWEST TECHNOLOGIES, INC.
RATE CONTROL CHANNELS
L & CHEMICALS CARRIER
.
-Ac
Flow
RATE
Gal./
®
1 2 3 L C