StarTech.com SV3253DXI - Manual (Page 64)

Instruction Manual
59
Troubleshooting
Forgotten master password
You can reset the master password using the serial interface on the unit. Use the S
command, and type a new password. The old password is not required for this procedure.
Similarly, you can press (and hold) the reset button (located to the immediate left of
the USB ports on the rear panel) for thirty seconds to clear all settings and return the
unit to factory defaults. This will clear the password to be admin.
Using a PS/2 Mouse, the remote mouse pointer and local mouse pointer don’t
line up
Use the Mouse resync command in the main menu or press the Resync button on the Bribar.
If the mouse pointers still don’t line up, verify that mouse acceleration has been disabled.
Please note: The Windows login screen does not accept the “mouse acceleration”
configuration, and always has the mouse accelerated regardless of your configuration.
Therefore, on this screen it is best to avoid using the mouse.
After resync, the mouse pointers are still not aligned.
Use the video adjust menu to position your video image exactly where it should be.
Normally a slight video positioning error is perceived as a mouse sync issue. A video
positioning error is visible as a black line along the top or bottom (and right or left)
edges of the remote screen. Remember to save your position changes!
Cannot login via SSH.
Remember to use either admin or a username created in the system as the user name
you give your SSH client. If you see a warning about identity of host cannot be verified,
and a question about saving the host’s fingerprint, this is normal for the first time you
connect to any machine running SSH. You should answer yes so that your SSH client
saves the public key of this host and doesn’t re-issue this warning.