StarTech.com SV3253DXI - Manual (Page 17)

Instruction Manual
12
3. Connect a USB keyboard and mouse device. (Please note that some
keyboards and mice may not work due to non-standard USB
implementation)
4. Connect a straight through CAT5 cable to port A on the user-station.
5. Connect the power to the remote user station.
Please Note: The remote user station operates just like the local user port, except a few
extra commands on OSD:
Please note that you may notice a pattern of vertical bars briefly displayed during
distance calibration; this is normal. As such, please disregard.
Using the Web Interface
The Web interface offers the most intuitive way to configure the SVxx53DXI, as it
provides a Java-based VNC client that can be used to control the host computer from a
remote location, as well as support for any industry-standard HTML Web browser.
You can access the Web interface by opening your Web browser and entering the IP
address of the SVxx53DXI you wish to access/configure. The IP address will be either
the address assigned by your DHCP server as identified in the previous section, or
192.168.1.123 (if your network uses static IP addressing).
Cause auto calibration to restart
Go to A port
Go to B port
+
To switch A/B connections at any time (even if no
KVM OSD is shown, or if current KVM is powered
down).