Table 5-3, Main features for network service configuration -4 – Solvline Eddy Series Ver 2.1a User Manual
Page 64
Chapter 5. Configuration via Web
5-4
Subnet
Mask
255.255.255.0
Current subnet mask Eddy is assigned to.
(When line type is Static IP, manually enter an
appropriate subnet mask.When line type is DHCP,
current subnet mask is displayed, but it is not
editable.)
Gateway 192.168.0.254
Current default gateway Eddy is assigned to
(When line type is Static IP, manually enter an
appropriate default gateway. When line type is DHCP,
current default gateway is displayed, but it is not
editable.)..
DNS 168.126.63.1
DNS
(Domain
Name Service) IP address
Main features for Network Service Configuration are as follows.
Table
5-3 Main features for Network Service Configuration
Menu
Default
Descriptions
Portview
IP / Port
0.0.0.0 / 4000
Set the IP address and the port number of the PC
where Portview is installed. For more information on
Portview, please refer to the Portview User Manual.
If IP is set to 0.0.0.0, this feature is disabled
DDNS
(Username/
Password)
203.32.117.1
Register DDNS server’s IP address for DDNS service.
DDNS service used in Eddy is supported by
default ID is eddy and default password is 99999999
if you want to used this ,you should register your own
SNMP Disable
Enable or disable SNMP(Simple Network Management
Protocol) support
▪MIB-II (RFC 1213): System, Interface, IP, ICMP, TCP, UDP
▪MIB-I (RFC 1317): Serial Interface
Telnet Service Enable
Enable or disable Telnet service.
If disabled, you cannot connect to Eddy via Telnet.
FTP Service
Enable
Enable or disable FTP service.
If disabled, you cannot connect to Eddy via FTP.
Web Service
Enable
Enable or disable Web service.
If disabled, you cannot connect to Eddy via Web.
LemonIDE
Target Agent
Disable
Enable or disable remote debugging function used by Eddy
development environment, LemonIDE®..
For more information, please refer to LemonIDE user
manual in the SDK CD included in Eddy-DK package.