Solvline Eddy Series Ver 2.1a - Manual (Page 57)

Chapter 4. Integration
◆ Factory default alias IP address: 10.10.1.1
In case you configure Eddy to use DHCP to obtain an IP address automatically, you might find it hard to
know the IP address to connect to. To provide users with an easier way to know the current IP address,
Eddy has a fixed alias IP that is always accessible. Use the address below whenever you cannot find
out Eddy’s IP address.
In order to connect with this address, you need to change network configurations so that your PC can
connect to the IP 10.10.1.1. Please refer to an example below, and note that values do not necessarily
have to be identical to the example below.
Figure 4-2. Connecting to alias IP address
◆ Connection via Detector
By running the Detector program in the Utility & Documents CD included in the Eddy package, you can
dynamically search for all Eddy modules on the network and connect to any module. (For more
information on Detector, please refer to the Portview manual in the Utility & Documents CD included
in the Eddy package)
4-4