Solvline Eddy Serial v2.5.1.1 User Manual
Page 69
Eddy User's Guide
69
Security
25
26
27
28
29
AT+BTKEY=$string
AT+BTSD?
AT+BTCSD
AT+BTFP,n
AT+BTSEC,a,e
Miscellaneous
30
31
AT+BTNAME=$string
AT+BTLPM,n
S-REGISTER
32
33
34
AT&V
ATSnn?
ATSnn=mm
ATZ
Response
OK
Purpose
Software Reset
Description
This has the same effects as Powercycling the unit.
This command disconnects any connected Bluetooth device, and stops ongoing
tasks. After rebooting, the status will be decided by the preset operation mode.
Some AT commands require the ATZ command be run so that the commands can
take effect.
AT&F
Response
OK
Purpose
Hardware reset
Description This has the same effect as initialization by pressing the factory reset button.
All parameters are initialized to factory defaults
AT
Response
OK
Purpose
Check the connection status with host equipment
Description Check if the connection to host equipment is operating normally. The serial
parameters of Eddy-BT must be same as those of host equipment. If not, the Eddy-BT
will not respond or ‘ERROR’ message will appear or an abnormal sequence of
strings will appear.