Solvline Eddy Serial v2.5.1.1 - Manual (Page 38)

Eddy User's Guide
38
Change Password Change ID and password for both Web and Telnet interface.
Update Firmware Update Eddy’s firmware.
Factory Default Restore all the factory default settings.
Save & Reboot Save the configurations and reboot Eddy.
5.3 Network Settings
Configure general network environment and network management. After changing values, you need to click
‘Submit’ button. Then you will see the same page with modified values. Please note that you have to ‘Save &
Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save current settings.
;
Since S4M doesn’t support LCD, “LAN Configuration” doesn’t appear.