Solvline PB2xxxUG User Manual
Page 23
Flow Control (Default: None)
J
A flow control protocol. You can set it to None, RTS/CTS, Xon/Xoff, Xoff.
Speed (Default: 9600 bps)
J
Speed can be set to the communication speed range of 150 bps ~ 230.4 Kbps.
Parity Bit (Default: None)
J
A parity check method. You can set it to None, Even, Odd.
Character Size (Default: 8)
J
Number of bits constituting one byte. You can set it to 5,6,7,8.
Stop Bit (Default: 1)
J
Number of Stop Bits. You can set it to 1, 2.
Keep Alive Time (Default: 0 sec)
J
The port is logically connected to PC and if the given time has been passed since
receiving or sending last data, this will automatically disconnect the port from the PC. (0–
connection will be maintained)
MTU Size (Default: 1 byte)
J
If there needs a certain volume of incoming data to be continuously received, you can
designate the MTU value.
Local
IP
Address
J
The port’s virtual IP address when it is used as a channel for other Portbase connection.
The address is used in case of Link protocol.
Remote
IP
Address
J
The opponent’s IP address. The address is used in case of Active-TCP; Telnet; Link
protocol.
Remote Socket Number
J
The opponent’s socket or port number. The number is used in case of Active-TCP; Telnet;
Link protocol.
23