Solvline PB2xxxUG - Manual (Page 15)

7) Configure the Portbase alias name: up to 32 characters (Default: None)
set name alias_name
8) Configure the Portbase group name: up to 32 characters (Default: None)
set group group_name
9) Configure the Portbase location name: up to 32 characters (Default: None)
set location location_name
10) Configure the NMS IP Address : (Default: 0.0.0.0)
set nms PortView_server_address
(For more details, refer to PortView manual.)
11) Configure the password: up to 8 characters (Default: 9999)
set password password
12) To confirm the configuration set, use command as follows
set view
13) After completion of configurations, you should save the configurations you applied.
If you made any changes on configuration, you must execute the save command.
set save
14) After changing the configuration, you should reboot the system.
reboot
15) Write the IP address assigned on the sticker at the bottom side of the Portbase. to remember.
15