Solvline PB2xxxUG - Manual (Page 14)

3
Configuration via Serial Port
In order to configure the environment in details, you have to connect the serial port of the PC to that of
Portbase.
To do a detailed setup, use commands as follows.
1) Configure the Line Type.
Portbase provides 3 line types as follows.
IP Type Configuration:
set line IP
DHCP Type Configuration: set line DHCP
PPPoE Type Configuration: set line PPPoE
2) Configure the Portbase IP Address.
set ip IP_ address
(Applicable only when the Line Type is IP.)
3) Configure the Subnet Mask. (Default: 255.255.255.0)
set mask Net_Mask_Address
(Applicable only when the Line Type is IP.)
4) Configure the Gateway IP Address.
set gateway Gateway_Address
(Applicable only when the Line Type is IP.)
5) Configure the PPPoE user name.
set username username
(Applicable only when the Line Type is PPPoE.)
6) Configure the PPPoE user password.
set userpass password
(Applicable only if the Line Type is PPPoE.)
14