SIG SAUER P250 - Manual (Page 53)

when it counts ™
www.sigsauer.com 53
12.0 service and Parts Policy
12.1 Parts Policy
our Service department maintains a full complement of replacement parts. even though most
gunsmiths have the knowledge, training, and the ability to make necessary repairs to your
firearm, the skill and workmanship of any particular gunsmith is totally beyond our control.
Should your firearm ever require service, we strongly recommend that you return it to Sig Sauer
(see section 12.3 “Shipping firearms for repair”). a firearm is a precision instrument and some
replacement parts will require individual fitting to ensure correct operation. a wrong part, improper
fitting, or incorrect mechanical adjustment may result in an unsafe condition or dangerous
malfunction, damage to the firearm, or cause possible serious injury to the shooter or others.
if any ParT iS ordered WiTHouT reTurning THe firearM To Sig Sauer, the customer
bears full responsibility for ensuring that the part supplied is correct for their particular
firearm and is properly installed and fitted by a qualified gunsmith.
Sig Sauer cannoT Be reSPonSiBle for THe funcTioning of any firearM in WHicH
rePlaceMenT ParTS are inSTalled By oTHerS.
waRning – PaRts PuRchaseRs
it is the purchaser’s responsibility to be absolutely certain that any parts
ordered from the factory are correctly fitted and installed. firearms
are complicated mechanisms and iMProPer fiTTing of ParTS May
reSulT in a dangerouS MalfuncTion, daMage To THe firearM,
and SeriouS inJury To THe SHooTer and oTHer PerSonS. The
purchaser and installer of parts must accept full responsibility for the correct adjustment and
functioning of the firearm after such installation.
PaRts must fit coRRectly